Adsorption capacity refers to the amount of adsorbents adsorbed on the adsorbent per unit mass under certain conditions. It is usually expressed in terms of K adsorbents /kg of adsorbent or mass percentage, which is a sign of the adsorption capacity of the adsorbent.
In industry, the amount of adsorption is called the activity of the adsorbent.
The activity of the adsorbent can be expressed in two ways 1) the static activity of the adsorbentUnder certain conditions, the equilibrium adsorption capacity of the adsorbent is its static activity.For a certain adsorption system, the static activity depends only on the adsorption temperature and the concentration or partial pressure of the adsorbed substance.
Dynamic activity of adsorbents
Under certain operating conditions, the gas mixture by adsorption bed, adsorption by adsorption, adsorption after a period of time, when starting from the adsorbent in the laminar flow of the gas adsorbed mass (or its concentration reaches a specified value), think bed fire, adsorption properties of adsorbent adsorption quantity at this time is called dynamic activity of adsorbent.
The activity is not only related to the characteristics of adsorbents and adsorbents, but also related to temperature, concentration and operating conditions.
The kinetic activity value of adsorbent is the main basis for the design of adsorption system.coal activated carbon manufacturer
The adsorption rateThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, the adsorption process can be divided intoThe adsorption process often takes a long time to reach equilibrium, and the contact time is limited in the actual production process.Therefore, the amount of adsorption depends on the adsorption rate, and the adsorption rate is related to the adsorption process, which can be divided into the following stepsAs one of the means of harmless waste treatment, incineration method can quickly realize the reduction of waste, harmless and recycling, so it has been more and more widely used in China.yrd carbon
In the process of waste incineration, toxic organic compounds such as dioxins are inevitably produced, which causes environmental pollution problems.
Activated carbon powder injection combined with bag dust collector (ACI+ BF) is an effective and widely used method to control dioxin emission from incinerator flue gas.
In order to provide reference and theoretical basis for the preparation and selection of activated carbon for the adsorption of dioxins, this paper carried out a study on the combined technology of activated carbon injection and double bag dust collector, the characteristics of activated carbon adsorption for dioxins and the influencing factors of activated carbon adsorption for dioxins.The adsorption and desorption isotherms of 13 kinds of commercial activated carbon were determined by low temperature nitrogen adsorption method, and the physical structures of activated carbon were calculated according to BET, T-Plot, BJH and DFT theory, and the iodine value and methylene blue value of 4 kinds of activated carbon were detected.
The physical structure characteristics of activated carbon were analyzed in detail to prepare for the subsequent experiment.