The pressure from substitutes and a moderate level of threat from new entrants has resulted in the low bargaining power of suppliers.Price forecasts are beneficial in purchase planning activated charcoal powder wholesale, especially when supplemented by the constant monitoring of price influencing factors. During the forecast period, the market expects a change of 5.00%-8.00%.Identify favorable opportunities in Activated Carbon TCO (total cost of ownership).
Expected changes in price forecast and factors driving the current and future price changes.
Identify pricing models that offer the most rewarding opportunities.
Information on how to identify strategic and tactical negotiation levels that will help achieve the best prices.Gain information on relevant pricing levels, detailed explanation on pros and cons of prevalent pricing models.
Methods to help engage with the right suppliers and discover KPI's to evaluate incumbent suppliers.Factors such as [10. For honeycomb activated carbon, the wall thickness is a very important parameter, by changing the wall thickness to improve its adsorption efficiency. Under the same porosity, thickness increases, the honeycomb carbon content per unit volume also will increase, which can improve the adsorption capacity. This is because the wall thickness increases, the fluid channel in the cellular cross-sectional area reduced, so the real surface or volume flow rate will increase. At the same time, the contact between adsorbate and carbon efficiency will, there is a balance between the two. Under the given conditions, the balance will determine adsorption increase or decrease. If the adsorbate at higher the diffusion rate diffuses to the inside of the honeycomb wall, and the empty adsorption site can be continuously adsorbed, so the thick-walled honeycomb should have better adsorption efficiency and adsorption capacity"Determination of air velocity and cross-sectional area of empty towerThe empty tower gas velocity is the velocity of gas passing through the entire cross section of the adsorber.The selection of air velocity not only directly determines the size and pressure drop of the adsorber, but also affects the adsorption efficiency.www.wyactivatedcarbon.com
If the gas speed is very small, the size of the adsorber is large and uneconomical.activated charcoal pellets bulk
If the gas velocity is too large, the pressure drop will increase and the adsorption efficiency will be affected.The optimum gas velocity was determined by experiment.
The adsorption design can not pursue too high adsorption efficiency, the empty tower speed value is reduced, it will make the adsorption bed volume, the amount of adsorbent and equipment cost increased greatly;On the contrary, it is not appropriate to take too large empty tower gas speed. Although the equipment cost is low, the adsorption efficiency drops a lot, and the pressure drop of the system will rise rapidly with the increase of the empty tower speed, resulting in excessive power consumption. Therefore, due to the selection of the appropriate air speed of the empty tower, the most suitable air speed of the empty tower is 0.8~1.2m/s"21, according to the empirical conclusion, this design determines